PC POLYblend PC/ABS 85V
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.22 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 25 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.50to0.70 % | |
| ISO 294-4 | 0.50to0.70 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Hot filament ignition temperature | IEC 60695-2-13 | 960 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179 | 3.0 kJ/m² | |
| ISO 179 | 30 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2 | 58.0 MPa | |
| Tensile strain | Yield | ISO 527-2 | 8.0 % |
| Flexural modulus | ISO 178 | 2600 MPa | |
| bending strength | ISO 178 | 90.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 123 °C | |
| ISO 75-2/B | 124 °C | ||
| ISO 75-2/A | 105 °C | ||
| ISO 75-2/A | 110 °C | ||
| vicat | ISO 306/A50 | 135 °C | |
| ISO 306/B50 | 125 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | 通过 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top