PPA M1533 Evonik Degussa
0
- Properties:Low friction coefficientlubricatedheat resistanthigh
- Usages:High temperature applications
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.53 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Wear factor | No Standard | 25 mm³/N·m | |
| Tensile modulus | ISO 527-2 | 11000 MPa | |
| tensile strength | Break | ISO 527-2 | 175 MPa |
| Tensile strain | Break | ISO 527-2 | 2.0 % |
| coefficient of friction | ASTM D1894 | 0.28 | |
| Impact strength of cantilever beam gap | ISO 180/1A | 7.5 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 45 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 300 to 315 ℃ | |
| Heat distortion temperature | ASTM D648 | 255 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top