Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | 内部方法 | 1.50 g/cm³ |
melt mass-flow rate | | 内部方法 | 9.0 g/10min |
flammability | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | 内部方法 | V-2 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
tensile strength | | 内部方法 | 140 MPa |
Flexural modulus | | 内部方法 | 9600 MPa |
bending strength | | 内部方法 | 195 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | 内部方法 | 24 kJ/m² |
Suspended wall beam without notch impact strength | | 内部方法 | 无断裂 |
Electrical performance | Test Condition | Test Method | Test Result |
---|
dielectric strength | | 内部方法 | 15 kV/mm |
Surface Resistivity | | 内部方法 | 1E+14 ohms |
Volume resistivity | | 内部方法 | 2.5E+15 ohms·cm |
Thermal performance | Test Condition | Test Method | Test Result |
---|
melting temperature | | 内部方法 | 285 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.