LDPE Trithene® TX 7010
0
- Usages:Industrial applicationsthin films
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D1505 | 0.922 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 1.0 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D2457 | 52 | |
| ASTM D2457 | 85 | ||
| Haze ratio | ASTM D1003 | 9.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 10.0 MPa | |
| ASTM D638 | 12.5 MPa | ||
| elongation | ASTM D638 | 500 % | |
| coefficient of friction | ASTM D1894 | 0.60 |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Secant modulus | ASTM D882 | 110 MPa | |
| tensile strength | ASTM D882 | 22.5 MPa | |
| ASTM D882 | 20.0 MPa | ||
| elongation | ASTM D882 | 300 % | |
| ASTM D882 | 630 % | ||
| Dart impact | ASTM D1709A | 180 g | |
| Elmendorf tear strength | ASTM D1922 | 400 g | |
| ASTM D1922 | 220 g | ||
| Secant modulus | ASTM D882 | 100 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D1525 | 91.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top