PEEK A2000 BASF GERMANY

Form：Granules | Grade：Food grade

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ASTM D256/ISO 179	2.5	kg·cm/cm(J/M)ft·lb/in
	Charpy Notched Impact Strength		ASTM D256/ISO 179	4	kg·cm/cm(J/M)ft·lb/in
	Charpy Notched Impact Strength	Charpy Notched Impact Strength		ASTM D256/ISO 179	5	kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap		ASTM D256/ISO 179	3.5	kg·cm/cm(J/M)ft·lb/in
	Impact strength of cantilever beam gap		ASTM D256/ISO 179	5	kg·cm/cm(J/M)ft·lb/in
		Impact strength of cantilever beam gap		ASTM D256/ISO 179	3.8	kg·cm/cm(J/M)ft·lb/in
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256/ISO 179	10	kg·cm/cm(J/M)ft·lb/in
Elongation at Break		ASTM D638/ISO 527	20	%
Elongation at Break	Elongation at Break		ASTM D638/ISO 527	20	%
Tensile modulus		ASTM D638/ISO 527	4400	kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	60	kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	5	%
Rockwell hardness		ASTM D785	M105
Bending modulus		ASTM D790/ISO 178	75	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	110	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility (rate)		UL 94	0
Hot deformation temperature	HDT	ASTM D648/ISO 75	320	℃（℉）
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	315	℃（℉）
Melting temperature			340	℃（℉）
Vicat softening temperature		ASTM D1525/ISO R306	1	℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	0.8	mm/mm.℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.31
Shrinkage rate		ASTM D955	5	%
melt mass-flow rate		ASTM D1238/ISO 1133	33	g/10min
melt mass-flow rate	melt mass-flow rate		ASTM D1238/ISO 1133	3	g/10min
Water absorption rate		ASTM D570/ISO 62	0.06	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257/IEC 60093	>10	Ω
Dielectric constant		ASTM D150/IEC 60250	3.2/3.2
Dielectric constant	Dielectric constant		ASTM D150/IEC 60250	3.2/3.6

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top