Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Melt volume flow rate | | ISO 1133 | 175 cm3/10min |
| Water absorption rate | | ISO 62 | 9.5 % |
| Water absorption rate | | ISO 62 | 3.0 % |
| density | | ISO 1183 | 1.13 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | ISO 2039-1 | 160 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179 | 200 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 250 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180 | 3.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180 | 4.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179 | 3.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179 | 4.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 3400 Mpa |
| tensile strength | | ISO 527-2 | 90.0 Mpa |
| Tensile strain | | ISO 527-2 | 4.0 % |
| Nominal tensile fracture strain | | ISO 527-2 | 10 % |
| Flexural modulus | | ISO 178 | 3000 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | 1E+15 ohms·cm |
| dielectric constant | | IEC 60250 | 3.30 |
| Dissipation Factor | | IEC 60250 | 0.030 |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/A | 65.0 °C |
| melting temperature | | ISO 3146 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices