TPEE LONGLITE® 1163LH
7
- Properties:Aging resistanceHigh temperature resistan
- Usages:packingAutomotive Applications
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.5 % | |
| Shrinkage rate | ISO 294-4 | 1.7 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| hardness | ISO 868 | 63 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength | ISO 527 | 36 Mpa | |
| tensile elongation | ISO 527 | 460 % | |
| Flexural elasticity | ISO 178 | 300 Mpa | |
| Impact Strength | ISO 179/IeA | PARTIAL BREAK kJ/㎡ | |
| Volume resistance rate | IEC 60093 | 7.0E 13 Ohm cm | |
| Performance resistance rate | IEC 60093 | 3.0E 13 Ohm | |
| dielectric breakdown strength | IEC 60243 | 17 KV/mm |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength | ISO 527 | 36 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | ISO 3146C | 211 °C | |
| melt mass-flow rate | ISO 1133 | 8 g/10 min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top