Epoxy EPO-TEK® E2036 Epoxy Technology Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD		75
LapShearStrength	23°C		10.3	MPa
Volume resistivity	23°C		<3.0E-4	ohms·cm
Uncured Properties	Test Condition	Test Method	Test Result	Test Unit
density	PartB		3.51	g/cm³
	density	粘度7(23°C)		10to20	Pa·s
		density	固化时间(150°C)		1.0	hr
		density	density	Pot Life		5000	min
Color	--5		Silver
Color	Color	--6		Silver
density	PartA		2.80	g/cm³
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	PartA		按重量计算的混合比:3.0
	Thermosetting components	PartB		按重量计算的混合比:1.0
	Thermosetting components	Thermosetting components	Shelf Life(23°C)		52	wk
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：导热系数		1.5	W/m/K
Glass transition temperature			>30.0	°C
Linear coefficient of thermal expansion	MD：--3		3.9E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：--4		1.8E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Particle size distribution			<20.0	µm
Ionic type	Cl-		422	ppm
	Ionic type	K+		8	ppm
		Ionic type	Na+		1	ppm
		Ionic type	Ionic type	NH4+		159	ppm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
DegradationTemperature			444	°C
Shear Strength	23°C		11.7	MPa
operate temperature	Continuous		-55-250	°C
	operate temperature	Intermittent		-55-350	°C
		operate temperature	StorageModulus(23°C)		4.40	GPa
		operate temperature	operate temperature	ThixotropicIndex		3.95
weight loss on heating	200°C		0.13	%
	weight loss on heating	250°C		0.32	%
	weight loss on heating	weight loss on heating	300°C		0.65	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top