PCT Infino TK-2046HD LOTTE KOREA

Properties:
Fillers
glass fiber reinforced materials
Compare

Technical Data Sheet

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTM D648	245 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,Unannealed,4.00mm	ISO 75-2/A	245 °C

optical performance	Test Condition	Test Method	Test Result
Yellowness Index	3.20mm	ASTM D1925	3.0 YI
Yellowness Index	Yellowness Index	--	ASTM D1925	3.0 YI

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	300°C/2.16kg	ASTM D1238	60 g/10min
melt mass-flow rate	melt mass-flow rate	300°C/2.16kg	ISO 1133	60 g/10min
density		ASTM D792	1.53 g/cm³
density	density		ISO 1183	1.53 g/cm³

mechanical properties	Test Condition	Test Method	Test Result
bending strength		ASTM D790	94.0 MPa
bending strength	bending strength		ISO 178	88.0 MPa
tensile strength	Yield	ASTM D638	66.0 MPa
tensile strength	tensile strength	Yield	ISO 527-2/5	58.0 MPa
elongation	Break	ASTM D638	2.0 %
Tensile strain	Break	ISO 527-2/5	2.0 %
flexural modulus		ASTM D790	5500 MPa
flexural modulus	flexural modulus		ISO 178	5400 MPa

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	23°C	ISO 179/1eA	2.0 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	25 kJ/m²
Impact strength of cantilever beam gap	23°C,3.18mm	ASTM D256	29 J/m
	Impact strength of cantilever beam gap	23°C,6.35mm	ASTM D256	29 J/m
		Impact strength of cantilever beam gap	23°C	ISO 180/1A	2.0 kJ/m²
			Impact strength of cantilever beam gap	23°C,3.18mm	ASTM D256	300 J/m
			Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C,6.35mm	ASTM D256	290 J/m
Suspended wall beam without notch impact strength	-5°C	ISO 180/1U	30 kJ/m²

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top