PA46 TW275F6 DSM HOLAND

Form：Granules | Grade：Injection grade

Properties:

wear resistantThermal stability

Typical Applications:

Automotive ApplicationsHome appliance components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Home appliance components
Properties:	wear resistant \| Thermal stability

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	60	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	75	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ISO 527-2	205	Mpa
	tensile strength	Break, 120°C	ISO 527-2	110	Mpa
		tensile strength	Break, 160°C	ISO 527-2	100	Mpa
			tensile strength	Break, 180°C	ISO 527-2	95.0	Mpa
			tensile strength	tensile strength	Break, 200°C	ISO 527-2	90.0	Mpa
Tensile strain	Break	ISO 527-2	3.5	%
	Tensile strain	Break, 120°C	ISO 527-2	8.4	%
		Tensile strain	Break, 160°C	ISO 527-2	8.9	%
			Tensile strain	Break, 180°C	ISO 527-2	9.1	%
			Tensile strain	Tensile strain	Break, 200°C	ISO 527-2	9.4	%
Bending modulus		ISO 178	9000	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	290	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	285	°C
Melting temperature		ISO 11357-3	295	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.5E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	6.0E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	1.3	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.50	%
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.5	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top