Share
Add to compare

Epoxy EPO-TEK® 320NC Epoxy Technology Inc.

Typical Applications:
Optical applications electrical and electronic applications medical and nursing supplies
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Optical applications | electrical and electronic applications | medical and nursing supplies

Certificates

No Data...

Technical Data Sheet

Cured PropertiesTest ConditionTest MethodTest ResultTest Unit
Shore hardnessShoreD85
LapShearStrength23°C>13.8MPa
Relative permittivity1kHz9.92
Volume resistivity23°C>2.0E+11ohms·cm
Dissipation factor1kHz0.067
Uncured PropertiesTest ConditionTest MethodTest ResultTest Unit
density粘度7(23°C)1.0to3.0Pa·s
density固化时间(70°C)1.0hr
densityPot Life20min
Color--5Black
Color--6Clear/Transparent
densityPartB0.878g/cm³
densityPartA2.05g/cm³
optical performanceTest ConditionTest MethodTest ResultTest Unit
transmissivity300to2500nm<1.0%
thermosettingTest ConditionTest MethodTest ResultTest Unit
Thermosetting componentsPartA按重量计算的混合比:10
Thermosetting componentsPartB按重量计算的混合比:1.0
Thermosetting componentsShelf Life(23°C)52wk
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Linear coefficient of thermal expansionMD:--49.4E-05cm/cm/°C
Glass transition temperature>50.0°C
Linear coefficient of thermal expansionMD:--32.8E-05cm/cm/°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Particle size distribution<20.0µm
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
DegradationTemperature340°C
Shear Strength23°C35.2MPa
operate temperatureStorageModulus(23°C)3.71GPa
weight loss on heating200°C0.39%
weight loss on heating250°C0.63%
weight loss on heating300°C1.3%
operate temperatureContinuous-55-175°C
operate temperatureIntermittent-55-275°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.