
PC/ABS C2800-BK1A423 SABIC INNOVATIVE NANSHA
70
Form:Granules | Grade:Injection grade
Properties:
High impact resistanceHigh mobilityFlame retardant
Typical Applications:
Household appliancesAutomotive sectorElectronic fieldElectrical field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Household appliances | Automotive sector | Electronic field | Electrical field |
| Properties: | High impact resistance | High mobility | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Elongation at Break | Break点 | ASTM D-638 | 50 | % |
| tensile strength | 屈伏点 | ASTM D-638 | 59 | Mpa |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 427 | J/m |
| Tensile modulus | ASTM D-638 | 2687 | Mpa | |
| Rockwell hardness | ASTM D-785 | 120 | R | |
| bending strength | ASTM D-790 | 96 | Mpa | |
| Bending modulus | ASTM D-790 | 2687 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Long term use temperature | 无冲击 | UL -746B | 60 | °C |
| Vicat softening temperature | ASTM D-1525 | 90 | °C | |
| UL flame retardant rating | UL -94 | 1.5 | mm | |
| Long term use temperature | 含冲击 | UL -746B | 60 | °C |
| Hot deformation temperature | 1.8Mpa | ASTM D-648 | 80 | °C |
| UL flame retardant rating | UL -94 | V-0 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 3.2mm | ASTM D-955 | 4-6 | E-3 |
| Water absorption rate | ASTM D-570 | 0.1 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D257 | 1E+14 | ohm-cm | |
| Volume resistivity | ASTM D-257 | 1E+17 | ohm-cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.