Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Thermosetting mixed viscosity | | ASTMD2393 | 1350 cP |
| | | 按重量计算的混合比:100,按容量计算的混合比:100 |
| | | 按重量计算的混合比:50,按容量计算的混合比:52 |
| Shelf Life | | 26 wk |
| Thermosetting mixed viscosity | | ASTMD2393 | 75.0 cP |
| Thermosetting mixed viscosity | | ASTMD2393 | 160 cP |
| Thermosetting mixed viscosity | | ASTMD2393 | 60到120 min |
| Thermosetting mixed viscosity | | ASTMD2393 | 7.0到8.0 min |
| Thermosetting mixed viscosity | | ASTMD2393 | 6.0到7.0 min |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 0.925 cm³/g |
| density | | | 0.60 % |
| density | | | 1.06 g/cm³ |
| density | | | 1.10 g/cm³ |
| density | | ASTMD792 | 1.12 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 73到77 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CureTime | | | 5.0到7.0 day |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 1450 MPa |
| tensile strength | Yield | ASTMD638 | 46.9 MPa |
| elongation | Yield | ASTMD638 | 10 % |
| Flexural modulus | | ASTMD790 | 1670 MPa |
| bending strength | | ASTMD790 | 67.6 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 35 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 89.4 °C |
| | ASTMD648 | 95.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare