PET AV2 360S DSM HOLAND

Form：Granules | Grade：Injection grade

Properties:

AntichemicalNot resistant to hot wateDimensional stability

Typical Applications:

Electronic and electrical componentsElectrical applicationsIndustrial components

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic and electrical components \| Electrical applications \| Industrial components
Properties:	Antichemical \| Not resistant to hot wate \| Dimensional stability

Certificates

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.60 mm	IEC 60695-11-10, -20	HB
UL flame retardant rating	UL flame retardant rating	0.780 mm	IEC 60695-11-10, -20	HB
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.25	%
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	0.50	%
density		ISO 1183	1.52	g/cm³
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ASTM D790/ISO 178	250	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	11500	kg/cm²(MPa)[Lb/in²]
Rockwell hardness		ASTM D785	114
tensile strength		ASTM D638/ISO 527	165	kg/cm²(MPa)[Lb/in²]
Tensile modulus		ASTM D412/ISO 527	11500	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D412/ISO 527	2	%
Impact strength of cantilever beam gap		ASTM D256/ISO 179	60	kg·cm/cm(J/M)ft·lb/in
Charpy Notched Impact Strength		ASTM D256/ISO 179	25	kg·cm/cm(J/M)ft·lb/in
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ASTM D256/ISO 179	7.5	kg·cm/cm(J/M)ft·lb/in
Impact strength of simply supported beam without notch	23°C	ISO 179/1eA	9.0	kJ/m²
Tensile strain	Break	ISO 527-2	2.5	%
tensile strength	Break	ISO 527-2	150	MPa
Tensile modulus		ISO 527-2	5500	MPa
Tensile modulus	Tensile modulus		ISO 527-2	8500	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	Transverse	ISO 11359-2	0.000070	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Flow	ISO 11359-2	0.000030	cm/cm/°C
Melting temperature		ISO 11357-3	255	°C
Hot deformation temperature	1.8 MPa,Unannealed	ISO 75-2/A	225	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top