Ethylene Copolymer RTP ESD 3284
0
- Properties:Mechanical properties
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| tensile strength | ASTM D638 | 60.0 MPa | |
| elongation | Yield | ASTM D638 | 1.0 % |
| Flexural modulus | ASTM D790 | 14500 MPa | |
| bending strength | ASTM D790 | 96.5 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 130 J/m | |
| density | ASTM D792 | 1.72 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.050to0.25 % | |
| Tensile modulus | ASTM D638 | 17200 MPa | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 270 J/m | |
| Heat distortion temperature | ASTM D648 | 210 °C | |
| Surface Resistivity | ESDSTM11.11 | <1.0E+3 ohms | |
| ASTM D257 | <1.0E+4 ohms | ||
| Volume resistivity | ASTM D257 | <1.0E+2 ohms·cm | |
| StaticDecay | FTMS101C4046.1 | <0.5 sec | |
| UL flame retardant rating | UL 94 | V-0 | |
| Primary Additive | 25 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top