ABS Novodur® M210TF

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityISO 11831.04 g/cm³
Melt volume flow rateISO 113330.0 cm³/10min
Shrinkage rateISO 294-40.40to0.70 %
hardnessTest ConditionTest MethodTest Result
ball-indentation hardnessISO 2039-190.0 MPa
Mechanical propertiesTest ConditionTest MethodTest Result
Tensile modulusISO 527-22050 MPa
tensile strength ISO 527-242.0 MPa
Tensile strainISO 527-22.4 %
Tensile strainISO 527-2>15 %
Flexural modulusISO 1782050 MPa
bending strengthISO 17860.0 MPa
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 17911 kJ/m²
Charpy Notched Impact StrengthISO 17917 kJ/m²
Impact strength of cantilever beam gapISO 180/A11 kJ/m²
Impact strength of cantilever beam gapISO 180/A17 kJ/m²
Electrical performanceTest ConditionTest MethodTest Result
relative permittivityIEC 602502.90
relative permittivityIEC 602502.90
Dissipation FactorIEC 602506E-03
Dissipation FactorIEC 602509E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Thermal performanceTest ConditionTest MethodTest Result
Linear coefficient of thermal expansionISO 11359-19E-05 cm/cm/°C
Heat distortion temperatureISO 75-2/B98.0 °C
Heat distortion temperatureISO 75-2/A94.0 °C
vicatISO 306/B5095.0 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top