TPS OH1365 SHANGHAI Eton
12
- Properties:Low hardnessExcellent encapsulation pExcellent surface tactileExcellent surface scratchExcellent weather resistaExcellent heat resistanceHigh liquidityShort molding cycleEasy to process
- Usages:Automotive industryInterior and exterior parCivilian consumer goodsProducts with special req
CompareTechnical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| hardness | 65 Shore A | ||
| density | 1.15 g/cm³ | ||
| tensile strength | 4.0 Mpa | ||
| elongation at break | 400 % | ||
| Shrinkage rate | 1.0 % | ||
| tear strength | 25 kN/m | ||
| hardness | 65 Shore A | ||
| density | 1.15 g/cm³ | ||
| tensile strength | 4.0 Mpa | ||
| elongation at break | 400 % | ||
| Shrinkage rate | 1.0 % | ||
| tear strength | 25 kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top