
PPA HTN54G15HSLRBK031 DUPONT SHENZHEN
142
Form:Granules | Grade:Wear resistant grade
Properties:
High temperature resistanFlame retardantFiller: Glass fiber reinf15%Filler by weight
Typical Applications:
Thin walled productscontainerchip
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Thin walled products | container | chip |
| Properties: | High temperature resistan | Flame retardant | Filler: Glass fiber reinf | 15% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 | kJ/m² |
| Charpy Notched Impact Strength | -40°C | ISO 179/1eA | 5.0 | kJ/m² |
| 23°C | ISO 179/1eA | 6.0 | kJ/m² | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 0.8mm | UL 94 | HB | |
| 1.5mm | UL 94 | HB | ||
| 0.8mm | IEC 60695-11-10,-20 | HB | ||
| 1.5mm | IEC 60695-11-10,-20 | HB | ||
| FMVSS flammability | FMVSS302 | B | ||
| Burning rate | 1.00mm | ISO 3795 | <100 | mm/min |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2 | 5500 | Mpa | |
| tensile strength | Break | ISO 527-2 | 125 | Mpa |
| Tensile strain | Break | ISO 527-2 | 3.5 | % |
| Bending modulus | ISO 178 | 4900 | Mpa | |
| bending strength | ISO 178 | 210 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 277 | °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 230 | °C | |
| Melting temperature | ISO 11357-3 | 300 | °C | |
| Linear coefficient of thermal expansion | MD:-- | ISO 11359-2 | 3.4E-05 | cm/cm/°C |
| MD:-40to23°C | ISO 11359-2 | 3.4E-05 | cm/cm/°C | |
| TD:-- | ISO 11359-2 | 7.3E-05 | cm/cm/°C | |
| TD:-40to23°C | ISO 11359-2 | 7E-05 | cm/cm/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.25 | g/cm³ | |
| Shrinkage rate | TD | ISO 294-4 | 0.70 | % |
| MD | ISO 294-4 | 0.40 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 1E+15 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.