
PBT 3200 ED3002 DAICEL MALAYSIA
99
Form:Granules
Properties:
Glass fiber reinforcedFlame retardantFiller: Glass fiber reinf20%Filler by weight
Typical Applications:
Home appliance componentsElectronic and electrical components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Home appliance components | Electronic and electrical components |
| Properties: | Glass fiber reinforced | Flame retardant | Filler: Glass fiber reinf | 20% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 176 | Mpa | |
| Bending modulus | ISO 178 | 6570 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.8 | % |
| tensile strength | ISO 527-2 | 120 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD:23to55°C | Internal Method | 9E-05 | cm/cm/°C |
| MD:23to55°C | Internal Method | 3E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 207 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 22 | KV/mm |
| Volume resistivity | IEC 60093 | 5E+16 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Scale | ISO 2039-2 | 100 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ColourNumber | EF2001/ED3002 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.