PP HP500N BASELL THAILAND

Form：Granules | Grade：Injection grade

Properties:

High mobilityHigh rigidity

Typical Applications:

container

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	container
Properties:	High mobility \| High rigidity

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179	110	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	0°C	ISO 179	30	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield	ISO 527-2	10	%
tensile strength	Yield	ISO 527-2	35.0	Mpa
Tensile modulus		ISO 527-2	1550	Mpa
Tensile strain	Break	ISO 527-2	>50	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	--	ISO 306/B50	85.0	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	153	°C
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	95.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)	230°C/2.16kg	ISO 1133	16.0	cm3/10min
melt mass-flow rate	230°C/2.16kg	ISO 1133	12	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top