ABS GF20 AS
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.19 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.20 % | |
| Water absorption rate | ASTM D-570 | 0.17 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D-790 | 69.6 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 69.4 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 400 J/m | |
| Rockwell hardness | ASTM D-785 | 107 R-Scale | |
| tensile strength | ASTM D-638 | 59.3 MPa | |
| elongation at break | ASTM D-638 | 3.5 % | |
| Flexural modulus | ASTM D-790 | 4830 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1.0E+10 to 1.0E+12 ohm.cm | |
| dielectric strength | ASTM D-149 | 18 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Heat distortion temperature | ASTM D-648 | 108 ℃ | |
| ASTM D-648 | 96.1 ℃ | ||
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000034 cm/cm/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top