Share
Add to compare

PA6 Starflam BFR552Y3 EUROSTAR FRANCE

Properties:
Filler glass mineral
Product Description
Certificates(0)
Datasheet

Product Description

Properties:Filler | glass mineral

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of cantilever beam gap23°CISO 180/1A4.0kJ/m²
Impact strength of cantilever beam gap-20°CISO 180/1A3.0kJ/m²
Impact strength of cantilever beam gap-40°CISO 180/1A3.0kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU30kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU25kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eA3.0kJ/m²
Charpy Notched Impact Strength-30°CISO 179/1eA2.0kJ/m²
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating0.75mmUL 94V-2
Burning wire flammability index1.0mmIEC 60695-2-12960°C
Extreme Oxygen IndexISO 4589-224%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
bending strengthISO 178145MPa
Bending modulusISO 1785500MPa
Tensile strainBreakISO 527-2/52.8%
tensile strengthBreakISO 527-2/585.0MPa
Tensile modulusISO 527-2/15800MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
RTIUL 74665.0°C
RTI ImpUL 74665.0°C
RTI ElecUL 74665.0°C
Linear coefficient of thermal expansionTD:23to60°CISO 11359-27E-05cm/cm/°C
Linear coefficient of thermal expansionMD:23to60°CISO 11359-24.5E-05cm/cm/°C
Hot deformation temperature0.45MPa,Unannealed,100mmSpanISO 75-2/Be210°C
Hot deformation temperature1.8MPa,Unannealed,100mmSpanISO 75-2/Ae180°C
Vicat softening temperature--ISO 306/B50205°C
Vicat softening temperature--ISO 306/B120207°C
Ball Pressure Test125°CIEC 60695-10-2通过
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Water absorption rateEquilibrium,23°C,50%RHISO 621.2%
Shrinkage rateMDInternal Method0.40to0.60%
densityISO 11831.34g/cm³
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Relative permittivity1MHzIEC 602503.30
Relative permittivity60HzIEC 602503.40
Relative permittivity50HzIEC 602503.40
Dielectric strength3.20mm,in OilIEC 60243-117kV/mm
Volume resistivityIEC 60093>1.0E+15ohms·cm
Surface resistivityIEC 60093>1.0E+15ohms
Dissipation factor50HzIEC 602505.7E-03
Dissipation factor60HzIEC 602505.7E-03
Dissipation factor1MHzIEC 602500.014
Compared to the anti leakage trace indexIEC 60112PLC 1
hardnessTest ConditionTest MethodTest ResultTest Unit
Rockwell hardnessL-SaleISO 2039-2110
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.