PA66 AG-30/10 LF
51
- Properties:high strengthHigh hardnessHigh impact resistanceHigh temperature resistanwear resistantSmoothnessChemical resistanceFiller: Glass fiber reinf30% filler by weight
- Usages:Automotive sectorIndustrial applicationsElectrical fieldElectronic fieldIndustrial machineryPower/Other ToolsIndustrial applicationsEngineering accessoriesApplication in the automotive fieldElectrical/Electronic ApplicationsConsumer product application fieldHome appliance componentssporting goods
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | % | 0.80 -- | |
| % | 0.40 -- | ||
| Water absorption rate | % | 5.0 -- | |
| % | 2.0 -- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | MPa | 6500 3000 | |
| tensile strength | MPa | 100 70.0 | |
| Tensile strain | % | 4.0 8.0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | kJ/m² | 30 | |
| kJ/m² | 40 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature (HDT) | °C | 190 -- | |
| °C | 70.0 -- | ||
| Continuous use temperature | °C | 90.0to110 -- | |
| °C | 180 -- | ||
| melting temperature | °C | 260 -- | |
| cm/cm/°C | 3E-05 -- | ||
| cm/cm/°C | 1E-04 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top