PPO N225X-701 SABIC INNOVATIVE US

156

Form：Granules | Grade：Injection grade

Properties:

ProcessabilityChlorine resistanceBromine freeFlame retardantNon brominatedImproved processability aNon chlorinatedFlame retardantNon brominatedImproved processability aNon chlorinatedFlame retardant

Typical Applications:

medical care

Supplier(4)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	medical care
Properties:	Processability \| Chlorine resistance \| Bromine free \| Flame retardant \| Non brominated \| Improved processability a \| Non chlorinated \| Flame retardant \| Non brominated \| Improved processability a \| Non chlorinated \| Flame retardant

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Izod impact value, gap- 22F		ASTM D-256	1.8	ft-lb/in
bending strength	Yield点	ASTM D-790	14400	psi
Izod Notched Impact Strength	23℃	ASTM D-256	3.5	ft-lb/in
tensile strength	Yield, 类型 I, 0.125	ASTM D-638	9700	psi
Izod impact value, reverse gap- 22F		ASTM D-256	12.0	ft-lb/in
Elongation at Break	类型I, 0.125	ASTM D-638	17.0	%
Instrument control anti impact energy @ peak, -22F		ASTM D-3763	8.6	ft-lbs
tensile strength	Break	ASTM D 638	7200	psi
Instrument control anti impact energy @ peak, 73F		ASTM D-3763	29.0	ft-lbs
Izod impact value, reverse gap, 73F		ASTM D 256	16.6	ft-lb/in
Tensile elongation, yield, type I 0.125		ASTM D-638	8.0	%
Bending modulus	0.25	ASTM D-790	361500	psi
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	测试厚度，V-0	UL 94	0.060	inch
Hot deformation temperature	264 psi, 0.250	ASTM D-648	211	deg F
UL file number			E121562
Hot deformation temperature	66 psi, 0.250", Unannealed	ASTM D-648	229	deg F
Vicat softening temperature		ASTM D-1525	264	deg F
Relative Heat Index (RTI)	机械冲击	UL 746B	80	deg C
	Relative Heat Index (RTI)	非机械冲击	UL 746B	95	deg C
	Relative Heat Index (RTI)	Relative Heat Index (RTI)	电气	UL 746B	95	deg C
UL flame retardant rating	测试厚度，5VA	UL 94	0.120	inch
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1.11
Mold shrinkage, xflow, 0.125		ASTM D-955	5-7	in/in E-3
Shrinkage rate	Flow, 0.125	ASTM D-955	5-7	in/in E-3
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D-257	>1 E14	ohm/sq
Dissipation factor	50 Hz	ASTM D-150	0.0100
Dielectric constant		ASTM D-150	2.55
Dielectric strength	油中, 125 mils	ASTM D-149	414	v/mil
Dissipation factor	1 MHz	ASTM D-150	0.0070
Dielectric constant		ASTM D-150	2.69
Volume resistivity		ASTM D-257	2E+16	ohm-cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Get App

Top

PPO N225X-701 SABIC INNOVATIVE US

Product Description

Certificates

Technical Data Sheet

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index