Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.38 g/cm³ |
| Apparent density | | ASTMD1895 | 0.57 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.66 % |
| Water absorption rate | | ASTMD570 | 0.41 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 91 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Limiting Oxygen Index | | ASTMD2863 | 26 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 53.0 MPa |
| elongation | Break | ASTMD638 | 0.80 % |
| Flexural modulus | | ASTMD790 | 7630 MPa |
| bending strength | | ASTMD790 | 77.8 MPa |
| compressive strength | | ASTMD695 | 209 MPa |
| Tensile modulus | | ASTMD638 | 8100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ASTMD256 | 19.9 J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | 21 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 4.9E+11 ohms·cm |
| dielectric strength | | ASTMD149 | 11 kV/mm |
| dielectric constant | | ASTMD150 | 4.60 |
| Dissipation Factor | | ASTMD150 | 0.048 |
| arc resistance | | ASTMD495 | 130 sec |
| Compared to the Leakage Tracking Index (CTI) | | UL746 | 150 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 174 °C |
| Continuous use temperature | | ASTMD794 | 193 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare