PA46 TW200B6 BK DSM JAPAN

Form：Granules | Grade：Flame retardant enhanced grade

Properties:

Flame retardant

Typical Applications:

Automotive ApplicationsElectronic and electrical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Electronic and electrical components
Properties:	Flame retardant

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	6.5	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	8.0	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	50	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	60	kJ/m²
Impact strength of cantilever beam gap	-40°C	ISO 180/1A	6.5	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	8.0	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	--	ISO 527-2	24000	Mpa
	Tensile modulus	120°C	ISO 527-2	10000	Mpa
		Tensile modulus	160°C	ISO 527-2	8800	Mpa
		Tensile modulus	Tensile modulus	180°C	ISO 527-2	8300	Mpa
tensile strength	Break	ISO 527-2	240	Mpa
	tensile strength	Break, 120°C	ISO 527-2	125	Mpa
		tensile strength	Break, 160°C	ISO 527-2	105	Mpa
		tensile strength	tensile strength	Break, 180°C	ISO 527-2	95.0	Mpa
Tensile strain	Break	ISO 527-2	2.0	%
	Tensile strain	Break, 120°C	ISO 527-2	3.0	%
		Tensile strain	Break, 160°C	ISO 527-2	3.0	%
		Tensile strain	Tensile strain	Break, 180°C	ISO 527-2	3.0	%
Bending modulus		ISO 178	18500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	290	°C
Melting temperature		ISO 11357-3	295	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	8.0E-6	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	3.4E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.28	g/cm³
Shrinkage rate	横向Flow	ISO 294-4	0.90	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.20	%
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.6	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1.0E+2	ohms·cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top