
TPEE 1163LLF TAIWAN CHANGCHUN
150
Form:Granules | Grade:Injection grade
Properties:
High temperature resistanLow temperature resistanc
Typical Applications:
packingCable
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | packing | Cable |
| Properties: | High temperature resistan | Low temperature resistanc |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| tensile strength | ISO 527 | 36 | Mpa | |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | Shore D | ISO 868 | 63 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | IEC 60243 | 17 | KV/mm | |
| Volume resistivity | IEC 60093 | 3.0E 13 | Ohm | |
| IEC 60093 | 7.0E 13 | Ohm cm | ||
| Impact strength of cantilever beam gap | ISO 179/IeA | PARTIAL BREAK | kJ/㎡ | |
| Flexural elasticity | ISO 178 | 300 | Mpa | |
| Elongation at Break | ISO 527 | 460 | % | |
| tensile strength | ISO 527 | 36 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 2.16kg at 230℃ | ISO 1133 | 8 | g/10 min |
| Melting temperature | ISO 3146C | 211 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | ISO 294-4 | 1.7 | % | |
| Water absorption rate | 24hr | ISO 62 | 0.5 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.