Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.13 g/cm³ |
| Shrinkage rate | | ASTM D955 | 0.50to0.70 % |
| melt mass-flow rate | | ASTM D1238 | 18 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D523 | 32 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| burning rate | | FMVSS302 | <90 mm/min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 530 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 320 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 82.7 MPa |
| Flexural modulus | | ASTM D790 | 2260 MPa |
| elongation | Break | ASTM D638 | 100 % |
| tensile strength | Yield | ASTM D638 | 53.8 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 107 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare