
ABS AS1003FR BK-038-5 SABIC INNOVATIVE US
193
Form:Granules | Grade:High liquidity level
Properties:
Conductive
Typical Applications:
Plastic bagElectronic and Electrical Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Plastic bag | Electronic and Electrical Applications |
| Properties: | Conductive |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 15.0 | J |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 18 | kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.0 | kJ/m² |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Break | ASTM D638 | 39.3 | Mpa |
| Break | ISO 527-2 | 37.0 | Mpa | |
| elongation | Yield | ASTM D638 | 2.6 | % |
| Tensile strain | Yield | ISO 527-2 | 2.2 | % |
| tensile strength | Yield | ISO 527-2 | 38.0 | Mpa |
| Yield | ASTM D638 | 42.1 | Mpa | |
| Tensile modulus | ISO 527-2/1 | 2700 | Mpa | |
| ASTM D638 | 3160 | Mpa | ||
| bending strength | ISO 178 | 66.0 | Mpa | |
| ASTM D790 | 75.8 | Mpa | ||
| Bending modulus | ISO 178 | 2800 | Mpa | |
| ASTM D790 | 3050 | Mpa | ||
| Tensile strain | Break | ISO 527-2 | 2.8 | % |
| elongation | Break | ASTM D638 | 6.2 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD:-40to40°C | ISO 11359-2 | 9.3E-05 | cm/cm/°C |
| TD:-40to40°C | ASTME831 | 6.3E-05 | cm/cm/°C | |
| MD:-40to40°C | ISO 11359-2 | 7.1E-05 | cm/cm/°C | |
| MD:-40to40°C | ASTME831 | 7.7E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 78.0 | °C |
| 1.8MPa,Unannealed,3.20mm | ASTM D648 | 88.3 | °C | |
| 0.45MPa,Unannealed,64.0mmSpan | ISO 75-2/Bf | 93.0 | °C | |
| 0.45MPa,Unannealed,3.20mm | ASTM D648 | 96.7 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD:24hr | ASTM D955 | 0.30 | % |
| TD:24hr | ASTM D955 | 0.40 | % | |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.20 | % |
| Shrinkage rate | MD:24hr | ISO 294-4 | 0.27 | % |
| TD:24hr | ISO 294-4 | 0.39 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D257 | 10to1.0E+3 | ohms | |
| Volume resistivity | ASTM D257 | 1E+04 | ohms·cm | |
| Shielding effectiveness (EMI) | 3.00mm | Internal Method | 50to65 | dB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.