PA12 L25W40X EMS-CHEMIE SWITZERLAND

Form：Granules | Grade：Injection grade

Properties:

High impact resistancehigh viscosity

Typical Applications:

Automotive sectorConsumer goods sectorPneumatic applicationsIndustrial applicationsHydraulic applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Consumer goods sector \| Pneumatic applications \| Industrial applications \| Hydraulic applications
Properties:	High impact resistance \| high viscosity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23℃/50%rh	DIN 53495	0.7	%
Water absorption rate	Water absorption rate	23℃/100%rh	DIN 53495	1.4	%
density		ISO 1183	1.02
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break		ASTM D412/ISO 527	>50	%
Impact strength of cantilever beam gap	0℃	ISO 180/IC	无断裂	KJ/m
tensile strength	50mm/min，Yield	ISO 527	25	Mpa
Shore hardness		IOS 2039-1	30	Mpa
Elongation at Break	50mm/min	ISO 527	200-300	%
Impact strength of cantilever beam gap	23℃	ISO 180/IA	无断裂	kj/cm
elongation		ASTM D412/ISO 527	20	%
Tensile modulus		ASTM D412/ISO 527	360	kg/cm²(MPa)[Lb/in²]
tensile strength	50mm/min，Break	ISO 527	40	Mpa
Impact strength of cantilever beam gap	-30℃	ISO 180/IA	13	kj/cm
Tensile modulus		ISO 527	360	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180/IC	无断裂	KJ/m
elongation at yield	50mm/min	ISO 527	30	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 3146-C	173	°C
Hot deformation temperature	1.82MPa	ISO 75	44	°C
Hot deformation temperature	Hot deformation temperature	0.46MPa	ISO 75	95	°C
Melting temperature			173	℃（℉）
Hot deformation temperature	HDT	ASTM D648/ISO 75	45	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D570/ISO 62	1.4	%
density		ASTM D792/ISO 1183	1.02	kg·cm/cm(J/M)ft·lb/in
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257/IEC 60093	10^11	Ω

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top