HIPS POLYREX® PH-858 TAIWAN CHIMEI
709
- Properties:High impact resistance
- Usages:Electrical enclosure
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTM D-792 | 1.08 | ||
| ASTM D792/ISO 1183 | 1.08 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 1/8" | ASTM D-256 | 11 | kg-cm/cm |
| Elongation rate | ASTM D-638 | 50 | % | |
| Impact strength of cantilever beam gap | 1/4" | ASTM D-256 | 10 | kg-cm/cm |
| tensile strength | ASTM D-638 | 400 | kg/cm | |
| Rockwell hardness | ASTM D-785 | R-107 | ||
| bending strength | ASTM D-790 | 580 | kg/cm | |
| Flexural elasticity | ASTM D-790 | 2.0 | ||
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 10 | kg·cm/cm(J/M)ft·lb/in | |
| ASTM D256/ISO 179 | 11 | kg·cm/cm(J/M)ft·lb/in | ||
| tensile strength | ASTM D638/ISO 527 | 400 | kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 50 | % | |
| Rockwell hardness | ASTM D785 | R-107 | ||
| Bending modulus | ASTM D790/ISO 178 | 2.0 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 580 | kg/cm²(MPa)[Lb/in²] |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Combustibility (rate) | UL94 | HB | ||
| Hot deformation temperature | ASTM D648/ISO 75 | 70 | ℃（℉） | |
| vicat softening point | ASTM D1525/ISO R306 | 87 | ℃（℉） | |
| Combustibility | UL 94 | HB | ||
| vicat softening point | ASTM D-1525 | 87 | °C | |
| Hot deformation temperature | ASTM D-648 | 70 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top