POM TENAC™-C Z4513
53
- Properties:UV resistanceWeather resistanceMedium viscosityVOC
- Usages:Industrial machineryAutomotive sectorEngineering accessoriesEngine partsShellApplication in the automotive field
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 9.0 g/10min | |
| Shrinkage rate | 内部方法 | 1.6-2.0 % | |
| Water absorption rate | ASTM D570 | 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 115 | |
| ASTM D785 | 80 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Taber abraser | ASTM D1044 | 14.0 mg | |
| bending strength | ASTM D790 | 88.0 Mpa | |
| Flexural modulus | ISO 178 | 2450 Mpa | |
| ASTM D790 | 2500 Mpa | ||
| elongation | ASTMD638 | 35 % | |
| tensile strength | ASTM D638 | 62.0 Mpa | |
| ISO 527-2 | 63.0 Mpa | ||
| Tensile modulus | ISO 527-2 | 2550 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| arc resistance | ASTM D495 | 250 sec | |
| dielectric strength | ASTM D149 | 19 KV/mm | |
| Volume resistivity | ASTM D257 | 1.0E+15-1.0E+16 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1.0E+16-1.0E+17 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 110 °C | |
| ISO 75-2/A | 97.0 °C | ||
| ISO 75-2/B | 154 °C | ||
| ASTM D648 | 158 °C | ||
| Linear coefficient of thermal expansion | ASTMD696 | 1E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top