EAA PRIMACOR™ 1430 STYRON US
476
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt flow rate | 190℃/2.16kg | ASTM D-1238 | g/10min | |
| 190℃/2.16kg | ISO 1133 | g/10min | ||
| Monomer content | % | Internal Method | ||
| density | ASTM D-792 | g/cm³ | ||
| ISO 1183 | g/cm³ | |||
| ASTMD792,ISO1183 | 0.930 | g/cm³ | ||
| Melt mass flow rate | 190°C/2.16kg | ASTMD1238,ISO1133 | 5.0 | g/10min |
| Content of comonomer | 内部方法 | 9.7 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| tensile strength | 屈服,模压成型4 | ASTMD638 | 7.67 | Mpa |
| 屈服,模压成型 | ISO527-2/508 | 7.67 | Mpa | |
| 断裂,模压成型4 | ASTMD638 | 19.5 | Mpa | |
| 断裂,模压成型 | ISO527-2/508 | 19.5 | Mpa | |
| elongation | 断裂,模压成型4 | ASTMD638 | 580 | % |
| 断裂,模压成型 | ISO527-2/508 | 580 | % | |
| Tensile yield strength | Compression Molded | ASTM D-638 | Mpa | |
| Compression Molded | Mpa | |||
| Tensile fracture strength | Compression Molded | ASTM D-638 | Mpa | |
| Compression Molded | Mpa | |||
| Tensile strain at break | Compression Molded | ASTM D-638 | % | |
| Compression Molded | % | |||
| Film thickness - Tested | um | 50.8 | ||
| Tensile yield strength (MD) | 50.8um | ASTM D-882 | Mpa | |
| Tensile yield strength (TD) | 50.8um | ASTM D-882 | Mpa | |
| Tensile yield strength (MD) | 50.8um | ISO 527-3 | Mpa | |
| Tensile yield strength (TD) | 50.8um | ISO 527-3 | Mpa | |
| Tensile fracture strength (TD) | 50.8um | ASTM D-882 | Mpa | |
| Tensile strength at break (MD) | 50.8um | ASTM D-882 | Mpa | |
| Tensile fracture strength (TD) | 50.8um | ISO 527-3 | 31 | Mpa |
| Tensile strength at break (MD) | 50.8um | ISO 527-3 | Mpa | |
| Tensile elongation at break (MD) | 50.8um | ASTM D-882 | 420 | % |
| Tensile elongation at break (TD) | 50.8um | ASTM D-882 | % | |
| 50.8um | ISO 527-3 | % | ||
| Tensile elongation at break (MD) | 50.8um | ISO 527-3 | 420 | % |
| Elmendorf Tear Strength (MD) | 50.8um | ASTM D-1922 | ||
| Elmendorf Tear Strength (TD) | 50.8um | ASTM D-1922 | ||
| Elmendorf Tear Strength (MD) | 50.8um | ISO 6383-2 | N | |
| Elmendorf Tear Strength (TD) | 50.8um | ISO 6383-2 | N |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| vicat softening point | ASTM D-1525 | ℃ | ||
| ISO 306 | ℃ | |||
| Melting temperature | ℃ | Internal Method | ||
| vicat softening point | ASTMD1525,ISO306 | 76.1 | °C | |
| Melting temperature | 内部方法 | 96.1 | °C |
| film | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Elmondov tear strength | MD:51µm | ASTMD1922 | 470 | g |
| TD:51µm | ASTMD1922 | 730 | g | |
| MD:51µm | ISO6383-2 | 2100 | N | |
| TD:51µm | ISO6383-2 | 3300 | N | |
| Tensile strength | MD:屈服,51µm | ASTMD882 | 10.4 | Mpa |
| TD:屈服,51µm | ASTMD882 | 10.2 | Mpa | |
| MD:屈服,51µm | ISO527-3 | 10.4 | Mpa | |
| TD:屈服,51µm | ISO527-3 | 10.2 | Mpa | |
| MD:断裂,51µm | ASTMD882,ISO527-3 | 30.6 | Mpa | |
| TD:断裂,51µm | ASTMD882,ISO527-3 | 31.0 | Mpa | |
| elongation | MD:断裂,51µm | ASTMD882,ISO527-3 | 420 | % |
| TD:断裂,51µm | ASTMD882,ISO527-3 | 470 | % |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| gloss | 45°,50.8µm | ASTMD2457 | 74 | |
| Haze | 50.8µm | ASTMD1003 | 4.0 | % |
| 50.8µm | ISO14782 | 4.0 | % | |
| gloss | 45°，50.8um | ASTM D-2457 | ||
| Haze | 50.8um | ISO 14782 | % | |
| 50.8um | ASTM D-1003 | % | ||
| Melt Temperature | ℃ | 196 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top