PP RheTech Polypropylene F38-01 RHETECH USA
0
- Properties:Fillerglass mineral35%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 10 g/10min | |
| ASTM D5630 | 35 % | ||
| density | ASTM D792 | 1.20 g/cm³ | |
| Shrinkage rate | ASTM D995 | 0.26 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 77 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 53.8 MPa | |
| Flexural modulus | ASTM D790 | 4830 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 48.1 J/m | |
| ASTM D5420 | 0.339 J |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| pressure holding | 2.07-8.27 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 154 °C | |
| ASTM D648 | 135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top