EHMWPE Formolene® DB5305A
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| density | ASTM D1505 | 0.954 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 5.5 g/10min | |
| Environmental stress cracking resistance | ASTM D1693B | >1000 hr | |
| tensile strength | ASTM D638 | 29.0 MPa | |
| elongation | ASTM D638 | >600 % | |
| Flexural modulus | Compression Molded | ASTM D790 | 1340 MPa |
| Impact strength of cantilever beam gap | Compression Molded | ASTM D1822 | 452 kJ/m² |
| Heat distortion temperature | ASTM D648 | 73.9 °C | |
| brittle temperature | ASTM D746 | <-70.0 °C | |
| vicat | ASTM D1525 | 126 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top