PA66 27GF-216
0
CompareTechnical Data Sheet
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | Dry | ISO527 | -- GPa |
| Impact strength of cantilever beam gap | Dry | ISO180 | -- KJ/m2 |
| bending strength | Dry | ISO178 | 189.8 MPa |
| tensile strength | Dry | ISO527 | 124.6 MPa |
| elongation at break | Dry | ISO527 | 5.0 % |
| Flexural modulus | Dry | ISO178 | 6.5 GPa |
| Impact strength of simply supported beam without notch | Dry | ISO179 | 69.1 KJ/m2 |
| Charpy Notched Impact Strength | Dry | ISO179 | 16.9 KJ/m2 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Plastic shrinkage rate | - | -- % | |
| - | -- % | ||
| Flame retardancy | UL94 | -- | |
| density | ISO1183 | -- g/cm3 | |
| Water absorption rate | ISO62 | -- % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | IEC93 | -- Ω.cm | |
| dielectric strength | Dry | IEC243 | -- Kv/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melting range | Dry | ISO3146 | -- ℃ |
| melt mass-flow rate | Dry | ISO1133 | -- g/10min |
| Linear expansion coefficient | ISO11359 | -- 10-5K | |
| ISO75 | -- ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top