TSU-Ether InnoTuf® HP-2130A
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.04 g/cm³ | ||
| Base Resin | 1.06 g/cm³ | ||
| Shrinkage rate | ASTMD2566 | 0.20到0.50 % | |
| density | 1.03 g/cm³ |
| thermosetting | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Resin | 按重量计算的混合比:100按容量计算的混合比:100 | ||
| Hardener | 按重量计算的混合比:45按容量计算的混合比:48 | ||
| Demold Time | 300到420 min |
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 0.13 Pa·s | |||
| 0.48 Pa·s | |||
| 0.63 Pa·s | |||
| 1.7E+02 hr | |||
| 20到30 min |
| Cured Properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Supporting hardness | ASTMD2240 | 25到35 | |
| tensile strength | ASTMD638 | 2.41 MPa | |
| elongation | Break | ASTMD638 | 500 % |
| tear strength | ASTMD624 | 10.5 kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top