
PC TRISTAR® PC-10FR-(V8) PTS USA
Typical Applications:
Electrical and electronic applications communication equipment
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical and electronic applications | communication equipment |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 590 | J/m |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 3.0mm | UL 94 | V-0 | |
| Burning wire flammability index | IEC 60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 775 | °C | |
| Extreme Oxygen Index | ASTM D2863 | 37 | % | |
| UL flame retardant rating | 1.5mm | UL 94 | V-1 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield,3.17mm | ASTM D638 | 62.1 | MPa |
| elongation | Break,3.17mm | ASTM D638 | 75 | % |
| Bending modulus | 3.17mm | ASTM D790 | 2210 | MPa |
| bending strength | Yield,3.17mm | ASTM D790 | 89.6 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 7E-05 | cm/cm/°C |
| TD:-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C | |
| RTI Elec | UL 746 | 125 | °C | |
| RTI Imp | UL 746 | 115 | °C | |
| RTI | UL 746 | 125 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 127 | °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 137 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.23 | g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 8.0 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot wire ignition | 3.0mm | UL 746 | PLC 2 | |
| Arc resistance | ASTM D495 | 60.0to120 | sec | |
| ASTM D495 | PLC6 | |||
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 1 | |
| CTI | UL 746 | PLC 2 | ||
| High voltage arc tracing rate | HVTR | UL 746 | PLC 3 | |
| Hot wire ignition | 1.50mm | UL 746 | PLC 2 | sec |
| 3.00mm | UL 746 | PLC 1 | sec | |
| 1.5mm | UL 746 | PLC 3 | ||
| High arc combustion index | 1.50mm | UL 746 | PLC 0 | |
| 3.00mm | UL 746 | PLC 0 | ||
| 1.5mm | UL 746 | PLC 0 | ||
| 3.0mm | UL 746 | PLC 1 | ||
| High voltage arc tracing rate | HVTR | UL 746 | PLC 4 | mm/min |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 120 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.