PFA MFA F1530 SOLVAY FRANCE

Form：Granules | Grade：Injection grade

Properties:

Flame retardantHigh cracking (stress craLow traffic

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Flame retardant | High cracking (stress cra | Low traffic

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	372℃/5.0kg	ASTM D-1238	4-8	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23℃，Break	ASTM D-1708	>28	MPa
Elongation at Break	23℃	ASTM D-1708	＞300	%
Charpy Notched Impact Strength		ASTM D-3307	No Break
Shore hardness	Shore D	ASTM D-2240	55-60
Tensile modulus	23℃	ASTM D-1708	400-500	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ASTM D-3307	265-275	℃
Crystallization peak temperature		ASTM D-3418	255-265	℃
Linear coefficient of thermal expansion	Flow	ASTM D-696	0.00012-0.0002	cm/cm/℃
specific heat	23℃	DSC	900-1100	J/kg/℃
Crystallization peak temperature	DSC		16-24	J/g
Melting heat	DSC		16-24	J/g
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D-257	>1E+17	ohms
Volume resistivity		ASTM D-257	>1E+17	ohm·cm
Dielectric strength	1mm	ASTM D-149	35-40	kV/mm
Dielectric constant	23℃，50Hz	ASTM D-150	2
Dielectric constant	Dielectric constant	23℃，100000Hz	ASTM D-150	2
Dissipation factor	23℃，50Hz	ASTM D-150	0.0005
Dissipation factor	Dissipation factor	23℃，100000Hz	ASTM D-150	0.0005

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top