GPPS GP-300
0
- Properties:High transparencyhigh plasticityand excellent coloring properties
- Usages:Suitable for injection moldingtoyslampshadesshell productscosmeticskitchen suppliesetc
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.006 cm/cm | |
| density | ASTM D-792 | 1.05 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.04 % | |
| melt mass-flow rate | ASTM D-1238 | 8 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 410 Kg/cm | |
| Shore hardness | ASTM D-785 | M-78 L,M-Scale | |
| Impact strength of cantilever beam gap | ASTM D-256 | 1.4 kg.cm/cm | |
| Flexural modulus | ASTM D-790 | 3.0×10 Kg/cm | |
| bending strength | ASTM D-790 | 800 Kg/cm | |
| elongation | ASTM D-638 | 2 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Diefectic constant | ASTM D-150 | 2.6 | |
| Dissipation Factor | ASTM D-150 | 0.0005 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 99 ℃ | |
| Heat distortion temperature | Unannealed | ASTM D-648 | 84 ℃ |
| UL flame retardant rating | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top