Epoxy D-MEC SCR9100
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.11 g/cm³ | ||
| 560 mPa·s |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| CriticalExposure | 6.80 mJ/cm² | ||
| PenetrationDepth | 130.0 µm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | 1100到1400 MPa | ||
| tensile strength | 28.0到32.0 MPa | ||
| elongation | Break | 14到17 % | |
| Flexural modulus | 1200到1500 MPa | ||
| bending strength | 42.0到62.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 32到43 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 60.0到65.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top