Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTMD570 | 0.70 % |
| density | | ASTMD792 | 1.12 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 24 g/10min |
| Shrinkage rate | | 内部方法 | 0.65 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 2400 MPa |
| tensile strength | Yield | ASTMD638 | 50.0 MPa |
| tensile strength | Break | ASTMD638 | 45.0 MPa |
| elongation | Break | ASTMD638 | 50 % |
| Flexural modulus | | ASTMD790 | 2600 MPa |
| bending strength | | ASTMD790 | 90.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 550 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 1E+15 ohms |
| Volume resistivity | | ASTMD257 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 101 °C |
| vicat | | ASTMD15252 | 130 °C |
| vicat | | ASTMD15253 | 120 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare