POM FG2025 POM-GF25 KEP KOREA

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh impact resistanceAging resistanceHigh temperature resistan

Typical Applications:

Household appliancesHousehold appliancesElectrical fieldElectronic fieldAutomotive sectorProfile

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household appliances \| Household appliances \| Electrical field \| Electronic field \| Automotive sector \| Profile
Properties:	Glass fiber reinforced \| High impact resistance \| Aging resistance \| High temperature resistan

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179/1eA	8.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	8.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	220	Mpa
Bending modulus		ISO 178	8250	Mpa
Tensile strain	Break	ISO 527-2	3.0	%
tensile strength		ISO 527-2	160	Mpa
Tensile modulus		ISO 527-2	9000	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	ISO 11359-2	3E-05	cm/cm/°C
Melting temperature		ISO 11357-3	165	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	162	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
Shrinkage rate	MD：3.00mm	Internal Method	0.50	%
melt mass-flow rate	190°C/2.16kg	ISO 1133	7.0	g/10min
density		ISO 1183	1.59	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		IEC 60243-1	23	KV/mm
Volume resistivity		IEC 60093	1E+14	ohms·cm
Surface resistivity		IEC 60093	1E+16	ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top