PPO SE1GFN2-BL5D066 SABIC INNOVATIVE THAILAND

Form：Granules | Grade：Injection grade

Properties:

enhanceGlass fiber reinforced Glass fiber reinforced

Typical Applications:

Electronic communication accessoriesElectronic communication accessories

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic communication accessories \| Electronic communication accessories
Properties:	enhance \| Glass fiber reinforced \| Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hrs	ASTM D-570	0.06	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield点，3.2mm	ASTM D-638	107	Mpa
tensile strength	tensile strength	Break点，3.2mm	ASTM D-638	5	Mpa
Impact strength of cantilever beam gap	-40°C	ASTM D-256	96	J/m
bending strength	6.4mm	ASTM D-790	152	Mpa
Impact strength of cantilever beam gap	23°C	ASTM D-256	107	J/m
Bending modulus	6.4mm	ASTM D-790	5719	Mpa
Rockwell hardness		ASTM D-785	106
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa	ASTM D-648	132	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa	ASTM D-648	137	°C
Long term use temperature	电气	UL 746B	110	°C
	Long term use temperature	含冲击	UL 746B	105	°C
	Long term use temperature	Long term use temperature	无冲击	UL 746B	110	°C
Linear coefficient of thermal expansion		ASTM E-831	3.6×10	1/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-1
UL flame retardant rating	UL flame retardant rating		UL 94	1.5	mm
Shrinkage rate	3.2mm	ASTM D-955	2-5	10
Dissipation factor	60Hz	ASTM D-150	0.0016
density		ASTM D-792	1.23
enhance			20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	60Hz	ASTM D-150	2.98

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top