Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO 62 | 0.70 % |
| density | | ISO 1183 | 1.35 g/cm³ |
| Shrinkage rate | | | 1.0to1.4 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Burning wire flammability index | | IEC 60695-2-12 | 650 °C |
| UL flame retardant rating | | UL 94 | HB |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ISO 180 | 35 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180/A | 4.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 4500 MPa |
| tensile strength | Yield | ISO 527-2 | 75.0 MPa |
| tensile strength | Break | ISO 527-2 | 75.0 MPa |
| Tensile strain | Yield | ISO 527-2 | 4.0 % |
| Tensile strain | Break | ISO 527-2 | 6.0 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 1 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 235 °C |
| Heat distortion temperature | | ISO 75-2/A | 95.0 °C |
| Heat distortion temperature | | | 110 °C |
| vicat | | ISO 306/A120 | 255 °C |
| ball-indentation hardness | | IEC 60695-10-2 | 通过 |
| melting temperature | | DSC | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare