PA66 ARNYL 66 30% FV NATURALE Daloga srl
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.35 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.30to0.40 % | |
| ash content | 30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 9600 MPa | |
| tensile strength | Break | ASTM D638 | 130 MPa |
| elongation | Break | ASTM D638 | 3.9 % |
| Flexural modulus | ASTM D790 | 9200 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 85 J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 68 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 258 °C | |
| ASTM D648 | 246 °C | ||
| vicat | ASTM D15252 | 260 °C | |
| ASTM D15253 | 258 °C | ||
| melting temperature | DSC | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top