PP 3010 FPC TAIWAN

Form：Granules | Grade：Injection grade

Properties:

High rigidityHigh impact resistanceExcellent low-temperatureExcellent rigidityComplies with FDA 21 CFR High impact strength

Typical Applications:

Blow molding applicationsCorrugated boardBlown molding

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Blow molding applications \| Corrugated board \| Blown molding
Properties:	High rigidity \| High impact resistance \| Excellent low-temperature \| Excellent rigidity \| Complies with FDA 21 CFR \| High impact strength

Certificates

TDS

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ISO 1133	1.3	g/10min
Shrinkage rate		FPC Method	1.3-1.7	%
density		ISO 1183	0.9
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ISO 527	25	Mpa
Elongation at Break		ISO 527	500	%
Rockwell hardness		ISO 2039	95	R
Bending modulus		ISO 178	1128	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180	55	kg.cm/cm
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-20℃	ISO 180	13	kg.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306	145	°C
Hot deformation temperature	HDT	ISO 75	110	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top