PP Homopolymer PPH1S20 M403

Properties:
Filler
Grupo
Repol
Grupo
Repol
Spain
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 1183/A	1.20 g/cm³
melt mass-flow rate		ISO 1133	20 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Break	ISO 527-2	2.5 %
Flexural modulus		ISO 178	3000 MPa
bending strength		ISO 178	50.0 MPa
Tensile modulus		ISO 527-2	4300 MPa
tensile strength	Break	ISO 527-2	37.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	3.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	25 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature (HDT)		ISO 75-2/A	100 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top