PA12 PLUSTEK RD302G6

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.35 g/cm³
density	density		ISO1183	1.35 g/cm³
Shrinkage rate		ASTMD955	0.16 %
Shrinkage rate	Shrinkage rate		ISO2577	0.16 %
Water absorption rate	Saturation	ASTMD570	1.2 %
Water absorption rate	Water absorption rate		ISO62	1.2 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	HB

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTMD638	7000 MPa
Tensile modulus	Tensile modulus		ISO527-2	7500 MPa
tensile strength	Yield	ASTMD638	130 MPa
Tensile stress	Yield	ISO527-2	130 MPa
elongation	Break	ASTMD638	4.0 %
Tensile strain	Break	ISO527-2	4.0 %
Flexural modulus		ASTMD790	6000 MPa
Flexural modulus	Flexural modulus		ISO178	6000 MPa
bending strength		ASTMD790	150 MPa
Bending stress		ISO178	150 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTMD256	180 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180	170 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
melting temperature		ISO11357-3	165to175 °C
		ASTMD3418	165to175 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top