ABS

ABS Stratasys ABS-M30i Stratasys

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	23°C	ASTM D256	280 J/m
Impact strength of cantilever beam gap	23°C	ASTM D256A	140 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	1.5mm	UL 94	HB

mechanical properties	Test Condition	Test Method	Test Result
bending strength		ASTM D790	60.7 MPa
Bending modulus		ASTM D790	2320 MPa
elongation	Break,3.18mm	ASTM D638	4.0 %
tensile strength	3.18mm	ASTM D638	35.9 MPa
Tensile modulus	3.18mm	ASTM D638	2410 MPa

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	TD	ASTME831	8.5E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	ASTME831	8.8E-05 cm/cm/°C
Vicat softening temperature		ASTM D15255	98.9 °C
Glass transition temperature		DSC	108 °C
Hot deformation temperature	1.8MPa,Unannealed,3.18mm	ASTM D648	82.2 °C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed,3.18mm	ASTM D648	95.6 °C

Physical properties	Test Condition	Test Method	Test Result
thickness	层能力		127.0to330.2 µm
density		ASTM D792	1.04 g/cm³

Electrical performance	Test Method	Test Result
Dielectric constant	ASTM D150	2.70to2.90
Dielectric strength	ASTM D149	3.1to15 kV/mm
Volume resistivity	ASTM D257	6.0E+13到1.5E+14 ohms
Dissipation factor	ASTM D150	5.1E-3到5.3E-3

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTM D785	110

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top